Allright, correcting myself here, since I hijacked another thread.
Can someone give me tips on usage of a rotary. I am considering just skipping the PC all together and going straight for the Makita.
Allright, correcting myself here, since I hijacked another thread.
Can someone give me tips on usage of a rotary. I am considering just skipping the PC all together and going straight for the Makita.
http://tassadar.ezekial.net
Good choice check CMA for Swirl removal tips and The meguiars video they have there it goes over rotary usage alot I would Recommend the Meguiars Cutting,Polishing,And Finishing Pads. And working on spots that are less visible first to see how you do. Its not as brutal as it sounds people over exagerate when they talk about burning thru the clear in the blink of an Eye. You can burn the Paint but you have to work at high Rpms with Agressive pads and compounds. Oh and before I forgot never go above 1500Rpm`s you shouldent need to and its more likely to do more damage at that level.
www.exotiXboard.com
Cant most compounds be done around 1200, and waxes applyed around 1000.
http://tassadar.ezekial.net
Yes your best online guide to rotarys is probley the CMA Section on removeing swirls and select the Rotary it shows good steps and has lots of writeups.
www.exotiXboard.com
Most of my compounding hapens at 1400-2000. When I started i stuck hard and fast to not going over 1400. Now i don`t` even look at the speed. Feel is more imporant. But you can only do that after you have the experience. Even better than watching a video (not a bad thing though) is get to a local body shop or detailor and ask someone who knows how to and has done it for years. Hands on is the best way to learn. Then get some scrap parts from the junk yard or a scrap pile at a body shop and practice on that so you don`t damage anything of value.
The Koop Is BIZZZAAAK
work on your lawn mower or something thats painted.
www.exotiXboard.com
The supa shiny off the hizzle fo shizzle Toro lawnmower!
http://tassadar.ezekial.net
with gold 5 inch wheels.
www.exotiXboard.com
Oh and while on the rotory subject see how many rotorys you can get your hands on b4 you pick one out. I`m not a fan of the makita and it`s handle. You may prefur the dewalt or milwaukee.
The Koop Is BIZZZAAAK
Im planning on takeing the handel off and just useing it that way. Since its nice to hold it by the front beak anyway.
www.exotiXboard.com
Sorry to say FrOzen but I couldn`t disagree more. There are SO many variables that come into play when using a rotary. Type of paint, age of finish, how it was maintained, area that you are hitting, products using, pads, etc etc. Even at relatively low speeds (below 1500 rpm) you can still do damage. "Burning" the paint may not be as easy at 1200 rpm as it is at say 1800 rpm but you can still do it and in not much time I might add. Also, remember a point Koop made about slopes, high spots, curves, etc? Even at 1500 rpm you dig in on one of those spots and you can easily be in trouble.Originally posted by Fr0zen
Good choice check CMA for Swirl removal tips and The meguiars video they have there it goes over rotary usage alot I would Recommend the Meguiars Cutting,Polishing,And Finishing Pads. And working on spots that are less visible first to see how you do. Its not as brutal as it sounds people over exagerate when they talk about burning thru the clear in the blink of an Eye. You can burn the Paint but you have to work at high Rpms with Agressive pads and compounds. Oh and before I forgot never go above 1500Rpm`s you shouldent need to and its more likely to do more damage at that level.
I`m certianly no rotary pro but I am developing a very good feel for when and how to properly use it. Along with the feel comes the respect for potential disaster. Take that tool lightly and you could be footing the bill to repaint a panel on someone`s 2 year old Beemer!
I`m not saying don`t buy a rotary or don`t learn how to use it. I am saying tread lightly. Also, IMO, having both a PC D.A. and rotary is a fantastic combination. They really compliment each other. Start with the PC. You can do A LOT with it. Whatever you do STAY AWAY FROM WOOL PADS WHILE YOU ARE LEARNING!
Natty
Natty
------------------------------------------------
"Sorry Miss, I just decided I don`t do mini-vans"
I have both and I have found, in my limited experience, that the pc handles most situations. I seldom find the need to use my rotary and it`s much more smart to be conservative when polishing. Patience and conservative practices will get a better job done without hurting anything. There`s no hurry. There is a NEED to do things right without doing damage. Slow down grasshopper
Dream big and be willing to do the work to get there.
It`s ok to offer a word of caution on the rotary subject, but some of us really want to learn how to use it properly (I`ve read more caution comments than how-to`s).
I have a PC and it works great for probably 90% of the time. No way I`ll give it. For that other 10%, a rotary may be just what is needed (short of color sanding maybe). I encountered just such a situation recently (the swirls again). If I had been skilled in rotary work I could have finished out the car perfectly. Many posters on the forum here use a rotary quite often and some exclusively.
So, for the new guys wanting to learn, what are the best ways to learn the ins and outs of rotary use? Are training classes offered somewhere? I understand getting an old panel from the junkyard, but that only goes so far (not enough ridges and slopes on a flat panel). The Meguiars video seems like a fair start, but I don`t know.
2000 Silverado Ext Cab Z71
Lt Pewter
Is it possible to get just plain body panels with different colors and types of paint (obviously clearcoat would be most important one to test with, but I would love to get some practice on other kinds) and how much, on average, would such a thing cost me?
I have the same questions as rtbrick though, I would really like to learn.
http://tassadar.ezekial.net
I totally understand what you are getting at RT....the problem is that today`s clearcoats are much more unforgiving than the old days of enamel and laquers....if you go too far or stay in on place too long the problems will out weigh the good.
Yes many people will say stay away...same as wet/dry sanding...I prefer dry actually and most peoples reaction is andthen when I bring out a crystal clear area with no mark and a great look they say, I can`t do that....I say yes you can....
Natty has seen me with his Rotary and his first reaction was the same....time patience and an experienced person with you will make it work right....forgiving products are also a big big help....
some will make you wish you never started at all....I learned in a body shop....go volunteer your time and do all the learning you can...just my 2 cents...
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks