Page 1 of 2 12 LastLast
Results 1 to 15 of 16

Thread: Plastic windows

  1. #1
    Phil's Avatar
    Join Date
    Feb 2003
    Location
    Pittsburgh
    Posts
    178
    Post Thanks / Like

    Plastic windows

    Any recommendations on cleaning plastic windows like the ones on Jeep wranglers without dulling them?
    :dunno

  2. #2
    Oh no, another engineer! MattS's Avatar
    Join Date
    Apr 2003
    Location
    Cleveland, OH
    Posts
    137
    Post Thanks / Like

    A few that come to mind ....

    A fwe that come to mind for plastic windows:

    Meguiars PlastX Clear Plastic Cleaner and Polish
    Poorboys Professional Polish
    Novus Plastic Polish

    All three of those should polish nicely without dulling.

    -Matt
    ------------------------------------------
    Matt - A part timer!!!

  3. #3

    Join Date
    Oct 2002
    Posts
    4,536
    Post Thanks / Like
    Well there is "cleaning", which should be done with a MF towel and a nice QD, like Poorboys, Clear Pearl, etc. Wipe in a linear direction only and never in circles.

    I prefer to mist the plastic windows, get it fairly wet, and then use a blotting/wiping motion paying close attention to not grind any grit into the window. Don`t use the same side for drying as you did wiping, in fact I usually use all four sides on two plastic windows. Flip and fold and use the other sides for the rest.

    Then we have "polishing", which is done to remove fine scratches and blemishes. In a pinch you can use good ol plain white toothpaste, such as original Crest or Colgate. When I use to build scale models for fun and competition I would have a tube of Colgate in my model box to rub out jet canopies and car windshields.

    As said Meguiars makes a nice plastic polish which was orginally formulated for furniture polish. I personally use the Novus Plastic Polish System. This is a 3 step system with #3 being the most aggressive of the 3 and should only be used to try and remove your deeper scratches and only apply it in the direction of the scratches. Apply it with a applicator sponge or a soft MF towel. Use a new towel and some QD to buff of the residue.

    Step #2 is designed to then polish out fine to medium scratches and this is applied in a circular motion, small tight motions. I use a sponge applicator for this step and again use the QD and MF to buff off. I do this step 3 or 4 times.

    Then apply the #1 which is very liquidy and mainly designed to polish an already clean surface. Works great on instrument cluster covers, wood trim on the interiors and plastic lenses on the exterior. Works great on sunglasses and I have used the system to also remove scratches on CD`s!

    Hope that helps....Oh, some folks also use Pledge on thier plastic windows and love it.

    Anthony
    "The Art & Science of Auto Detail"

  4. #4
    Phil's Avatar
    Join Date
    Feb 2003
    Location
    Pittsburgh
    Posts
    178
    Post Thanks / Like
    I think were talking about the same thing, but just in case, I mean the type of windows youll find on a Jeep Wrangler soft top. (the ones that unzip to open). Are we talking about the same ones? Ive never heard of "polishing them" I could be wrong

  5. #5

    Join Date
    Aug 2003
    Location
    York County, Pennsylvania
    Posts
    16
    Post Thanks / Like

    Thumbs up

    Have to say thanks on this one!
    Probably would have asked same question in the near future.
    :beer

  6. #6
    Just One More Coat Beemerboy's Avatar
    Join Date
    Apr 2003
    Location
    Sonoma County, CA
    Posts
    12,320
    Post Thanks / Like
    Phil

    Anthony is talking about the same type of windows. I ahve a few cars that I do ands I have used Novus and its the bomb. Depending on how bad they are it can really do the trick. Just remember that they are really soft and scratch easy and I do mean easy. Having said that I wonder is the ones on Jeep are harder plastic. I would still use Novus with the application that Anthony has posted
    Old Enough To Know Better, Too Stupid To Care....

    Dave`s Detailing
    Sonoma County, CA

  7. #7
    Phil's Avatar
    Join Date
    Feb 2003
    Location
    Pittsburgh
    Posts
    178
    Post Thanks / Like
    Thanks a mill you guys, I knew I could depend on DC for this one

    Ill post pics when the job is done

  8. #8
    Right Wing Conservative NozeBleedSpeed's Avatar
    Join Date
    Jul 2003
    Location
    Jacksonville,Florida
    Posts
    366
    Post Thanks / Like
    I have some Plexus. Any opinions on that?
    Im Zaino free.

  9. #9

    Join Date
    Oct 2002
    Posts
    4,536
    Post Thanks / Like
    Plexus is a great polisher but it has no cleaning abilities, at least in the way of removing fine scratches.

    Beemerboy,

    Thanks so much for that great reply to Phil

    Anthony
    "The Art & Science of Auto Detail"

  10. #10
    JeffBruce's Avatar
    Join Date
    Aug 2002
    Location
    Maryland
    Posts
    876
    Post Thanks / Like
    Anthoney:
    Where do you get Novus Plastic Polish....TOL???

  11. #11

    Join Date
    Oct 2002
    Posts
    4,536
    Post Thanks / Like
    jeff,

    check out your local Harley dealer. They carry the larger size bottles.

    Anthony
    "The Art & Science of Auto Detail"

  12. #12

    Join Date
    Jul 2003
    Location
    LA
    Posts
    6
    Post Thanks / Like
    For Novus, you can call 1-800-548-6872 for the nearest distributor (according to the bottle).
    Anthony, as usual, is right on. Novus is a great system of products. And his application instructions are impeccable.

    Dave

  13. #13

    Join Date
    Oct 2002
    Posts
    4,536
    Post Thanks / Like
    Here is a picture I have posted before but this seems like a good time to re-post it. I used the Novus system on here and please note that product #3 is pretty aggressive so it should not be used on the whole plastic window but just the larger, heavier scratches.

    Then I used #2, then #1, QD it then a few buffs with Plexus for gloss.

    Before:
    "The Art & Science of Auto Detail"

  14. #14

    Join Date
    Oct 2002
    Posts
    4,536
    Post Thanks / Like
    After:
    "The Art & Science of Auto Detail"

  15. #15

    Join Date
    Oct 2002
    Posts
    4,536
    Post Thanks / Like
    Now alot of what you see is just caked on dirt but there was some slight hazing even after the washing due to paint overspray which was removed with some delicate clay work.

    My main goal was to try and remove or at least lighten up the plastic windows crease or fold line. This is caused by people lowering their plastic windows without first cleaning them. The grit and grime then get folded in on themselves and grind away at the plastic causing scratches.

    The most improvement came from a marked difference in clarity. Before it was like looking out a foggy window and after it was so much clearer and you could actually make out things in back of you

    Anthony
    "The Art & Science of Auto Detail"

 

 
Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Fixing plastic windows
    By mp5_toronto in forum Washing, Drying, and Claying
    Replies: 32
    Last Post: 09-16-2010, 10:25 PM
  2. Replies: 1
    Last Post: 04-20-2009, 09:43 PM
  3. Plastic Windows
    By Beemerboy in forum Auto Detailing 101
    Replies: 8
    Last Post: 12-04-2004, 12:27 AM
  4. Jeep PLastic Windows
    By kevmo327 in forum Car Detailing Product Discussion
    Replies: 4
    Last Post: 03-31-2004, 06:11 PM
  5. Help on plastic windows (Anthony?)
    By Murf300 in forum Car Detailing
    Replies: 4
    Last Post: 10-05-2003, 09:00 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •